Samsung iDCS 500, MCP2 MAIN CONTROL PROCESSOR
- In Stock
- Calculated at Checkout
MAIN CONTROL PROCESSOR (MCP2)
The Main Control Processor (MCP2) is installed in a dedicated processor slot, slot 10, of the first cabinet and has positions for three daughter boards. The first daughter board position (MCP2_D1) can support one of four types of daughter board, a Multi-Frequency Module (MFM), a Switch/Conference Module (SCM), an R2/CID Module (RCM2), in a single cabinet system running M version software and is required to support the Expanded Switching Module (ESM) in a multiple cabinet system running L software. The second daughter board position (MCP2_D2) can support the MFM, the SCM, or the RCM2 board. The third daughter board (MCP2_D3) can support a Miscellaneous (MISC) daughter board, the MFM, the SCM, or the RCM2 board.
MAIN CONTROL PROCESSOR (MCP2) DAUGHTER BOARD CAPABILITIES
MCP2 - D1
MCP2 - D2
MCP2 - D3
Types of Daughter Boards allowed per position
MFM, SCM, RCM2 and ESM*
MFM, SCM and RCM2
MFM, SCM, RCM and MISC
* The ESM must be installed in this position in a Multiple Cabinet .
Note: Only one of any type of daughter board may be installed on any processor card. In an L version system ONLY the ESM board can be installed on the MCP2 card. Do not install any other types of daughterboard on the MCP2 in an L version system. Other daughter boards may be installed on the SCP2 card.