Viking RAD-AMP Amplified Remote Access Device

The RAD-AMP extends the usefulness of your phone system to remote employees, as well as providing call forwarding to remote employees or locations.

As a line extender, the RAD-AMP provides authorized users remote access to PABX, Centrex or Electronic Key system features.

As a call diverter, the RAD-AMP provides call forwarding from one location to another. After detecting an inbound call, the RAD-AMP accesses a second phone line, dials a preprogrammed Touch Tone number, and then bridges the two lines.

As a Telecommuting extender, the RAD-AMP gives remote workers access to most PABX/KSU features from their home or cell phone. The home based employee hears a special tone when answering and has the option of taking the work related call. Remote call center personnel can "Log-In" and Log-Out" or change their forwarding number as their location changes. Using Touch Tones, remote workers can use phone system features to transfer the call to another extension or voice mail, start a conference call, generate a page or any other feature available to an analog PABX/KSU extension.

For "Data" applications, the RAD-1 is required

Line Extender
• Bridge calling zones
• Utilize inexpensive WATS, FX or TIE lines
• Remotely access paging amplifiers (PA-2A, HF-3W) or service observers (SO-24A)
• Remote audio monitoring of radio or church programs and security sites
  
  Call Diverter
• Forward calls to voice mail or dictation equipment
• Eliminate C.O. "Call forwarding" charges
• Forward after hours calls to "on call" employees or answering services
  
  Telecommuting Extender
• Home based call center personnel
• Outside sales staff
• Traveling executives and personnel

Standard Features
• Improved audio amplifier
• Programmable 6 digit security code
• Programmable ring delay
• Remote night switch
• Disconnects on CPC, busy, return dial tone, maximum call time or by dialing #7
• Non-volatile memory (no batteries required)
• Auxiliary dry contacts
• Programmable 15 second to 49.5 minute call timer
• Compatible with analog stations on PABX and KSU systems
• Simple programmable toll restriction
  
  Line Extender
• Access code(s)
• 500 ms hook switch flash command
• 2 second disconnect command
  
  Call Diverter
• 32 digit phone number memory
  
  Telecommuting Extender
• Log-In and Log-Out capability
• Special tone notifies of work related calls
• Supports PABX/KSU features (transfers, voicemail, paging, etc.) to remote employees

• Power: 120VAC/13.8VAC 1.25A UL listed adapter provided
• Dimensions: 133mm x 130mm x 38mm (5.25" x 5.1" x 1.5")
• Weight: 1.0 Kg (2 lbs 3 oz.)
• Environmental: 0�C to 32�C (32�F to 90�F) with 5% to 95% non-condensing humidity
• Connections: (2) RJ11 modular jacks
• Amplification: Factory set to 3dB of audio gain